The Base Cloth and Varnish Treatment

The Base Cloth

POWER base cloth is selected to have high mechanical strength, to be free from acids which would attack and weaken fibers during treatment or storage, and from starch or other substances preventing through penetration by the treating varnishes and producing a laminated rather than a homogeneous material.

Varnish Treatment

POWER base cloth is treated with insulation varnishes made in the General Electric factory by skilled varnish makers, from carefully selected and regularly inspected high grade raw materials. These varnishes are applied so as thoroughly to treat the fabric and produce an homogeneous material.

Power Cloth insulating varnishes are chemically inert as regards the cloth to which they are applied, and show a minimum of chemical action in the presence of metallic conductors.

Black Varnish Treated Cloth

Black varnished cloths possess extreme flexibility and are more permanent than yellow cloths when subjected to high temperatures. Their oily surface renders them particularly moisture repellent. Because of their superior insulation qualities, they are to be preferred for all work where a hard surface film is not required.

FIELD OF APPLICAION

By its characteristics varnish POWER can be used in the construction and repair of motors, transformer and material that must work under adverse conditions.

SUGGESTED USES

POWER is applied using traditional methods. It is usually done by dipping the coils in question.

Drying time-practical with a 5 HP motor, is approximately 2-3 hours at 30C. When the coils are of larger dimensions or have difficult evaporation (closed coils) we recommend drying time of 2 hours at 100-120C

SUPPLY

In plastic pet bottle & jar containers with a capacity of 200ml, 500ml, 1ltr, 5ltr, and 20ltr